To start off I am not an audio expert nor an engineer.
Well I have been looking into many commercial music frequency analysis, and I found that most of them has the same spectrum
or frequency as you can see in the pictures below. So why are they so similar and how can I do it.
Every picture represent a different track.
Hi, I recently recorded a ton of footage and for some reason the game volume recorded twice. As on when a character speaks they are speaking like this "like LIKE they THEY are ARE repeating REPEATING themseves..." Is there a way I can make the lower audio (it's actually quite distinct and with playing around I can kinda get rid of it, but I barely know how to repeat the steps and kinda messed it up so I had to start over.) It's taken me hours just on this one section of the clip and it seems like it's such an easy fix. If I choose to isolate female vocals it still there but I just want to make the quiet parts quiet and the loud parts loud... if that makes sense. :/
Thank you.
So I am working on this corporate productiion and I delivered the movie to my client. All finished and well. But like in every corporate production there is bound to come an afterburner frome some guy or girl from marketing or corporate communications. And this happened again today: One tiny soundbite has to be removed.
Is there a way to remove that soundbite in my Premiere sequence and send the timeline into to the Audition project I have already finished, WITHOUT having to manually adjust, normalize and equalize each and every clip again?
I guess what I'm really asking is: is there a way to merge the latest version of my Pr sequence with a previous one in Audition?
almost every time I use Audition cc (2015.2) it stops responding. usually this happens when I am trying to save. Is their anything I can do to prevent it? Are the files I'm saving to big maybe? It usually gets st on the file that's a little over an hour long.
Since updating to Audition 2015.2 it keeps struggling (crashing for about 30 seconds) to switch between Multitrack to Waveform the first time I try on each project. Not sure why but thought I'd post it here incase the bug hasn't been picked upon yet.
when I look on my stream for twitch.tv and listen to my voice as well as just what's going on in game i'm hearing weird water drop noises, echoes, heavy breathing, when i'm not breathing heavily. you get the picture I need custom settings I looked on youtube to try to enhance it and it works good for recording but for streaming it's terrible, terrible, terrible help o.o x.xx o.o
I moved Audition CS6 from an old computer to a new one running Windows 10. (We have Audition CS6 running well on several computers with Windows 10.)
When the program starts, this error message pops up, "Your license could not be validated. Audition must now shut down."
I worked with tech support for over three and a half hours yesterday via chat and by giving them remote control of the computer and they could not solve it. They said that I would need to post the issue here and their experts would help me resolve the issue.
We have uninstalled and reinstalled numerous time and have deleted all adobe directories in between reinstalls. That did not make a difference.
Tech support remotely did several things with adobe_prtk.exe (I'm not sure what that is) and it did not help.
We also disabled the firewall to make sure there was not something blocking the access to validation and that did not help.
I would appreciate any help in solving this issue.
I'm having a hard time with Adobe CS6 synching up with my soundcard. Latency settings and other applications are challenging at this time. I had 3.0, but my Windows 7 computer is now "deceased". Please help.
Hi all,
I'm working on a Mac running OSX v 10.11.3, using Premiere Pro and Audition, both with the latest updates. I'm trying to roundtrip a short audio sequence from Premiere into Audition and back again. I've done this many times, with this exact audio sequence, without difficulty, and in that time I haven't changed my operating system, hardware, or versions of Premiere or Audition.
I can send the sequence from Premiere to Audition using the "Edit in Audition" command. In Audition, when I go to Export back to Premiere Pro as a stereo mix, it shows that it's preparing files to send to Premiere, but the usual dialogue box in Premiere (asking what track the mix should go to) never appears, and neither does any new mix. I've tried this in several test projects and it hasn't worked in any of them.
I know the changes should update automatically now once I save in Audition. That has not been happening, which is why I'm still trying to work this out.
The Adobe support staff doesn't seem to know what's going on either. I can't send anything whatsoever back from Audition to Premiere. Anyone had this issue before? Thanks so much in advance for any help. It's dearly appreciated.
Hello,
I program music for a college radio station and was wondering which marker to use to indicate a song starting to fade out & into the next element. I currently have the EOD cart timer set at the end of every song and have tried placing it a few seconds before a song ends, but have had no luck. For reference, we use Wide Orbit as our automation system. Please help!
Thanks,
Janelle
We have an Adobe Audition 3 workstation that lost the 15 or so presets in the Dynamic Effects drop down and there are now only 5 showing. How do I restore the factory presets?
Good evening everyone!
I have been using Audition for quite awhile and I am now getting into 5.1 editing! To my surprise, my on board 5.1 card is not being recognized by audition!
Now, I have spent the past 2 days trying to figure out a way to make this works... and the only solution is to buy an actual sound card!
The first I need to know/understand, is what kind of card do I need to have the 6 channels show up and map them? I found the Soundblaster Audigy FX (Sound Blaster Audigy Fx - Sound Blaster - Creative Labs (United States) ) and I was wondering if Au would recognize it properly. Is a budget of 50$ enough nowadays for a decent card or do I need to find a different company to edit 5.1 surround?
Thanks for your help.
Current setup : I7-875k / 64GB / 6TB / Dual 570 GTX / Windows 10
I'm running Windows 7 and CS5.5 would stop working I would close it and reopen and most of the time that worked. Now its will not open at all. I tried uninstalling and reinstalling but still will not open. Any ideas?
Buongiorno a tutti. Ieri ho aggiornato tutte le mie APP (ho un abbonamento CREATIVE CLOUD). Aggiornamento OK
Ho aperto AUDITION e sono spariti tutti i miei PRESET riguardanti il RACK EFFETTI costruiti in MESI e MESI di LAVORO.
Ho iniziato un disco, ho masterizzato alcuni brani e ora mi ritrovo a non avere più le stesse impostazioni.
C'è modo di recuperarli?
Grazie a chi vorrà aiutarmi
R
I can open Audition and edit, but clicking the "Play" button doesn't start playing the file, either in waveform or multitrack. Help?
Funcionaba de maravilla pero luego de actualizar la pc a Windows 10, al abrir el Audition, manda un cuadro de diálogo que dice "error interno del dispositivo MME. Ya verifique. En el hardware de audio como recomiendan en varios videos en You tuve, pero sigue igual. Ayudenme por favor.
Hi all,
I've been searching all day, but I've found little that references my question.
Can the Korg nanoKontrol2 be used with cs6? I saw something a while back about it having a learn fuction that allowed it to be used here, but I can find it again...
Thanks,
Keith Turner
Hello there.
I'm working with a client who's recorded a lot of interviews via a speakerphone on his smartphone. He's in quality, having recorded his questions on a recording device, but the answers from the guests are all on the speakerphone. It doesn't sound great, as you can imagine (I recommended getting the guests to record their answers on their smartphone's voice recorder, but apparently that wasn't possible...)
Is there any possible way of making that sound a little less harsh? I'm using CS6.
Any help gratefully appreciated!
P
I'm working on a sequence exported from Premiere. One of the three stereo tracks is recorded only on the left channel. In Premiere, the easy fix is the "fill right" or "fill left" effect. How is that handled in Audition?
I plan to export the separate tracks back to Premiere.
I'm trying to learn new programs right now and Audition has me ripping hair out. I understand it's a really great program that you can do a lot with but when you need to find one single thing, it's a nightmare.
That said, I am trying to mix one song with another and the speed doesn't quite match up. What I want to do is slow it down. I looked all over the internet and got the same exact answers again and again that it's in time/pitch and it's in pitch correction but I do that and all it does it just make it sound lower and doesn't change the speed at all. Can somebody please help me with this I'm seriously thinking of giving up on Audition and going to Audacity because it's so much easier without all the bells and whistles being shoved in my face.